%!TEX root = ../blob1.tex

\def\xxpar#1#2{\smallskip\noindent{\bf #1} {\it #2} \smallskip}

\section{$n$-categories (maybe)}

\label{sec:ncats}

\nn{experimental section.  maybe this should be rolled into other sections.

maybe it should be split off into a separate paper.}

Before proceeding, we need more appropriate definitions of $n$-categories, 

$A_\infty$ $n$-categories, modules for these, and tensor products of these modules.

(As is the case throughout this paper, by ``$n$-category" we mean

a weak $n$-category with strong duality.)

Consider first ordinary $n$-categories.

We need a set (or sets) of $k$-morphisms for each $0\le k \le n$.

We must decide on the ``shape" of the $k$-morphisms.

Some $n$-category definitions model $k$-morphisms on the standard bihedron (interval, bigon, ...).

Other definitions have a separate set of 1-morphisms for each interval $[0,l] \sub \r$, 

a separate set of 2-morphisms for each rectangle $[0,l_1]\times [0,l_2] \sub \r^2$,

and so on.

(This allows for strict associativity.)

Still other definitions \nn{need refs for all these; maybe the Leinster book}

model the $k$-morphisms on more complicated combinatorial polyhedra.

We will allow our $k$-morphisms to have any shape, so long as it is homeomorphic to a $k$-ball.

In other words,

\xxpar{Morphisms (preliminary version):}

{For any $k$-manifold $X$ homeomorphic 

$\cC(X)$.}

bijection of sets $f:\cC(X)\to \cC(Y)$.

So we replace the above with

\xxpar{Morphisms:}

{For each $0 \le k \le n$, we have a functor $\cC_k$ from 

homeomorphisms to the category of sets and bijections.}

(Note: We usually omit the subscript $k$.)

We are being deliberately vague about what flavor of manifolds we are considering.

They could be unoriented or oriented or Spin or $\mbox{Pin}_\pm$.

They could be topological or PL or smooth.

(If smooth, ``homeomorphism" should be read ``diffeomorphism", and we would need

to be fussier about corners.)

For each flavor of manifold there is a corresponding flavor of $n$-category.

We will concentrate of the case of PL unoriented manifolds.

Next we consider domains and ranges of morphisms (or, as we prefer to say, boundaries

of morphisms).

The 0-sphere is unusual among spheres in that it is disconnected.

Correspondingly, for 1-morphisms it makes sense to distinguish between domain and range.

For $k>1$ and in the presence of strong duality the domain/range division makes less sense.

\nn{maybe say more here; rotate disk, Frobenius reciprocity blah blah}

We prefer to combine the domain and range into a single entity which we call the 

boundary of a morphism.

Morphisms are modeled on balls, so their boundaries are modeled on spheres:

\xxpar{Boundaries (domain and range), part 1:}

{For each $0 \le k \le n-1$, we have a functor $\cC_k$ from 

homeomorphisms to the category of sets and bijections.}

(In order to conserve symbols, we use the same symbol $\cC_k$ for both morphisms and boundaries.)

\xxpar{Boundaries, part 2:}

These maps, for various $X$, comprise a natural transformation of functors.}

(Note that the first ``$\bd$" above is part of the data for the category, 

while the second is the ordinary boundary of manifolds.)

Given $c\in\cC(\bd(X))$, let $\cC(X; c) = \bd^{-1}(c)$.

Most of the examples of $n$-categories we are interested in are enriched in the following sense.

all $c\in \cC(\bd X)$, have the structure of an object in some auxiliary category

(e.g.\ vector spaces, or modules over some ring, or chain complexes),

and all the structure maps of the $n$-category should be compatible with the auxiliary

category structure.

Note that this auxiliary structure is only in dimension $n$;

$\cC(Y; c)$ is just a plain set if $\dim(Y) < n$.

\medskip

\nn{At the moment I'm a little confused about orientations, and more specifically

about the role of orientation-reversing maps of boundaries when gluing oriented manifolds.

Tentatively, I think we need to redefine the oriented boundary of an oriented $n$-manifold.

Instead of an ordinary oriented $(n-1)$-manifold via the inward (or outward) normal 

first (or last) convention, perhaps it is better to define the boundary to be an $(n-1)$-manifold

equipped with an orientation of its once-stabilized tangent bundle.

Similarly, in dimension $n-k$ we would have manifolds equipped with an orientation of 

their $k$ times stabilized tangent bundles.

For the moment just stick with unoriented manifolds.}

\medskip

We have just argued that the boundary of a morphism has no preferred splitting into

domain and range, but the converse meets with our approval.

That is, given compatible domain and range, we should be able to combine them into

the full boundary of a morphism:

\xxpar{Domain $+$ range $\to$ boundary:}

Let $\cC(B_1) \times_{\cC(E)} \cC(B_2)$ denote the fibered product of the 

two maps $\bd: \cC(B_i)\to \cC(E)$.

Then (axiom) we have an injective map

\[

	\gl_E : \cC(B_1) \times_{\cC(E)} \cC(B_2) \to \cC(S)

\]

which is natural with respect to the actions of homeomorphisms.}

Note that we insist on injectivity above.

Let $\cC(S)_E$ denote the image of $\gl_E$.

We have ``restriction" maps $\cC(S)_E \to \cC(B_i)$, which can be thought of as

domain and range maps, relative to the choice of splitting $S = B_1 \cup_E B_2$.

as above, then we define $\cC(B)_E = \bd^{-1}(\cC(\bd B)_E)$.

Next we consider composition of morphisms.

For $n$-categories which lack strong duality, one usually considers

$k$ different types of composition of $k$-morphisms, each associated to a different direction.

(For example, vertical and horizontal composition of 2-morphisms.)

In the presence of strong duality, these $k$ distinct compositions are subsumed into 

one general type of composition which can be in any ``direction".

\xxpar{Composition:}

Note that each of $B$, $B_1$ and $B_2$ has its boundary split into two $k{-}1$-balls by $E$.

We have restriction (domain or range) maps $\cC(B_i)_E \to \cC(Y)$.

Let $\cC(B_1)_E \times_{\cC(Y)} \cC(B_2)_E$ denote the fibered product of these two maps. 

Then (axiom) we have a map

\[

	\gl_Y : \cC(B_1)_E \times_{\cC(Y)} \cC(B_2)_E \to \cC(B)_E

\]

which is natural with respect to the actions of homeomorphisms, and also compatible with restrictions

to the intersection of the boundaries of $B$ and $B_i$.

If $k < n$ we require that $\gl_Y$ is injective.

(For $k=n$, see below.)}

\xxpar{Strict associativity:}

{The composition (gluing) maps above are strictly associative.}

The above two axioms are equivalent to the following axiom,

which we state in slightly vague form.

\xxpar{Multi-composition:}

{Given any decomposition $B = B_1\cup\cdots\cup B_m$ of a $k$-ball

into small $k$-balls, there is a 

map from an appropriate subset (like a fibered product) 

of $\cC(B_1)\times\cdots\times\cC(B_m)$ to $\cC(B)$,

and these various $m$-fold composition maps satisfy an

operad-type strict associativity condition.}

The next axiom is related to identity morphisms, though that might not be immediately obvious.

\xxpar{Product (identity) morphisms:}

Then we have a map $\cC(X)\to \cC(X\times D)$, usually denoted $a\mapsto a\times D$ for $a\in \cC(X)$.

If $f:X\to X'$ and $\tilde{f}:X\times D \to X'\times D'$ are maps such that the diagram

\[ \xymatrix{

	X\times D \ar[r]^{\tilde{f}} \ar[d]_{\pi} & X'\times D' \ar[d]^{\pi} \\

	X \ar[r]^{f} & X'

} \]

commutes, then we have $\tilde{f}(a\times D) = f(a)\times D'$.}

\nn{Need to say something about compatibility with gluing (of both $X$ and $D$) above.}

All of the axioms listed above hold for both ordinary $n$-categories and $A_\infty$ $n$-categories.

The last axiom (below), concerning actions of 

homeomorphisms in the top dimension $n$, distinguishes the two cases.

We start with the plain $n$-category case.

\xxpar{Isotopy invariance in dimension $n$ (preliminary version):}

to the identity on $\bd X$ and is isotopic (rel boundary) to the identity.

Then $f$ acts trivially on $\cC(X)$; $f(a) = a$ for all $a\in \cC(X)$.}

We will strengthen the above axiom in two ways.

(Amusingly, these two ways are related to each of the two senses of the term

``pseudo-isotopy".)

First, we require that $f$ act trivially on $\cC(X)$ if it is pseudo-isotopic to the identity

in the sense of homeomorphisms of mapping cylinders.

This is motivated by TQFT considerations:

If the mapping cylinder of $f$ is homeomorphic to the mapping cylinder of the identity,

then these two $n{+}1$-manifolds should induce the same map from $\cC(X)$ to itself.

\nn{is there a non-TQFT reason to require this?}

Second, we require that product (a.k.a.\ identity) $n$-morphisms act as the identity.

Let $J$ be a 1-ball (interval).

We have a collaring homeomorphism $s_{Y,J}: X\cup_Y (Y\times J) \to X$.

We define a map

\begin{eqnarray*}

	\psi_{Y,J}: \cC(X) &\to& \cC(X) \\

	a & \mapsto & s_{Y,J}(a \cup ((a|_Y)\times J)) .

\end{eqnarray*}

\nn{need to say something somewhere about pinched boundary convention for products}

We will call $\psi_{Y,J}$ an extended isotopy.

\nn{or extended homeomorphism?  see below.}

\nn{maybe remark that in some examples (e.g.\ ones based on sub cell complexes) 

extended isotopies are also plain isotopies, so

no extension necessary}

It can be thought of as the action of the inverse of

a map which projects a collar neighborhood of $Y$ onto $Y$.

(This sort of collapse map is the other sense of ``pseudo-isotopy".)

\nn{need to check this}

The revised axiom is

\xxpar{Pseudo and extended isotopy invariance in dimension $n$:}

to the identity on $\bd X$ and is pseudo-isotopic or extended isotopic (rel boundary) to the identity.

Then $f$ acts trivially on $\cC(X)$.}

\nn{need to rephrase this, since extended isotopies don't correspond to homeomorphisms.}

\smallskip

For $A_\infty$ $n$-categories, we replace

isotopy invariance with the requirement that families of homeomorphisms act.

For the moment, assume that our $n$-morphisms are enriched over chain complexes.

\xxpar{Families of homeomorphisms act.}

{For each $n$-ball $X$ and each $c\in \cC(\bd X)$ we have a map of chain complexes

\[

	C_*(\Homeo_\bd(X))\ot \cC(X; c) \to \cC(X; c) .

\]

Here $C_*$ means singular chains and $\Homeo_\bd(X)$ is the space of homeomorphisms of $X$

which fix $\bd X$.

These action maps are required to be associative up to homotopy

\nn{iterated homotopy?}, and also compatible with composition (gluing) in the sense that

a diagram like the one in Proposition \ref{CDprop} commutes.

\nn{repeat diagram here?}

\nn{restate this with $\Homeo(X\to X')$?  what about boundary fixing property?}}

We should strengthen the above axiom to apply to families of extended homeomorphisms.

To do this we need to explain extended homeomorphisms form a space.

Roughly, the set of $n{-}1$-balls in the boundary of an $n$-ball has a natural topology,

and we can replace the class of all intervals $J$ with intervals contained in $\r$.

\nn{need to also say something about collaring homeomorphisms.}

\nn{this paragraph needs work.}

\nn{say more here?}

In the other direction, if we enrich over topological spaces instead of chain complexes,

we get a space version of an $A_\infty$ $n$-category, with $\Homeo_\bd(X)$ acting 

instead of  $C_*(\Homeo_\bd(X))$.

Taking singular chains converts a space-type $A_\infty$ $n$-category into a chain complex

type $A_\infty$ $n$-category.

\medskip

The alert reader will have already noticed that our definition of (plain) $n$-category

is extremely similar to our definition of topological fields.

The only difference is that for the $n$-category definition we restrict our attention to balls

(and their boundaries), while for fields we consider all manifolds.

\nn{also: difference at the top dimension; fix this}

Thus a system of fields determines an $n$-category simply by restricting our attention to

balls.

The $n$-category can be thought of as the local part of the fields.

Conversely, given an $n$-category we can construct a system of fields via 

\nn{gluing, or a universal construction}

\nn{Next, say something about $A_\infty$ $n$-categories and ``homological" systems

of fields.

The universal (colimit) construction becomes our generalized definition of blob homology.

Need to explain how it relates to the old definition.}

\medskip

\nn{these examples need to be fleshed out a bit more}

Examples of plain $n$-categories:

\begin{itemize}

\item Let $F$ be a closed $m$-manifold (e.g.\ a point).

Let $T$ be a topological space.

For $X$ a $k$-ball or $k$-sphere with $k < n$, define $\cC(X)$ to be the set of 

all maps from $X\times F$ to $T$.

For $X$ an $n$-ball define $\cC(X)$ to be maps from $X\times F$ to $T$ modulo

(Note that homotopy invariance implies isotopy invariance.)

For $a\in \cC(X)$ define the product morphism $a\times D \in \cC(X\times D)$ to

be $a\circ\pi_X$, where $\pi_X : X\times D \to X$ is the projection.

\item We can linearize the above example as follows.

Let $\alpha$ be an $(n{+}m{+}1)$-cocycle on $T$ with values in a ring $R$

(e.g.\ the trivial cocycle).

For $X$ of dimension less than $n$ define $\cC(X)$ as before.

For $X$ an $n$-ball and $c\in \cC(\bd X)$ define $\cC(X; c)$ to be

the $R$-module of finite linear combinations of maps from $X\times F$ to $T$,

modulo the relation that if $a$ is homotopic to $b$ (rel boundary) via a homotopy

$h: X\times F\times I \to T$, then $a \sim \alpha(h)b$.

\nn{need to say something about fundamental classes, or choose $\alpha$ carefully}

\item Given a traditional $n$-category $C$ (with strong duality etc.),

define $\cC(X)$ (with $\dim(X) < n$) 

to be the set of all $C$-labeled sub cell complexes of $X$.

For $X$ an $n$-ball and $c\in \cC(\bd X)$, define $\cC(X)$ to finite linear

combinations of $C$-labeled sub cell complexes of $X$

modulo the kernel of the evaluation map.

Define a product morphism $a\times D$ to be the product of the cell complex of $a$ with $D$,

and with the same labeling as $a$.

More generally, start with an $n{+}m$-category $C$ and a closed $m$-manifold $F$.

Define $\cC(X)$, for $\dim(X) < n$,

to be the set of all $C$-labeled sub cell complexes of $X\times F$.

Define $\cC(X; c)$, for $X$ an $n$-ball,

to be the dual Hilbert space $A(X\times F; c)$.

\nn{refer elsewhere for details?}

\item Variation on the above examples:

for example product boundary conditions or take the union over all boundary conditions.

\nn{maybe should not emphasize this case, since it's ``better" in some sense

to think of these guys as affording a representation

of the $n{+}1$-category associated to $\bd F$.}

\end{itemize}

Examples of $A_\infty$ $n$-categories:

\begin{itemize}

\item Same as in example \nn{xxxx} above (fiber $F$, target space $T$),

but we define, for an $n$-ball $X$, $\cC(X; c)$ to be the chain complex 

$C_*(\Maps_c(X\times F))$, where $\Maps_c$ denotes continuous maps restricting to $c$ on the boundary,

and $C_*$ denotes singular chains.

\item

Given a plain $n$-category $C$, 

define $\cC(X; c) = \bc^C_*(X\times F; c)$, where $X$ is an $n$-ball

and $\bc^C_*$ denotes the blob complex based on $C$.

\end{itemize}

\medskip

Next we define [$A_\infty$] $n$-category modules (a.k.a.\ representations,

a.k.a.\ actions).

The definition will be very similar to that of $n$-categories.

Out motivating example comes from an $(m{-}n{+}1)$-dimensional manifold $W$ with boundary

in the context of an $m{+}1$-dimensional TQFT.

Such a $W$ gives rise to a module for the $n$-category associated to $\bd W$.

This will be explained in more detail as we present the axioms.

Fix an $n$-category $\cC$.

Define a {\it marked $k$-ball} to be a pair $(B, N)$ homeomorphic to the pair

(standard $k$-ball, northern hemisphere in boundary of standard $k$-ball).

We call $B$ the ball and $N$ the marking.

A homeomorphism between marked $k$-balls is a homeomorphism of balls which

restricts to a homeomorphism of markings.

\xxpar{Module morphisms}

{For each $0 \le k \le n$, we have a functor $\cM_k$ from 

the category of marked $k$-balls and 

homeomorphisms to the category of sets and bijections.}

(As with $n$-categories, we will usually omit the subscript $k$.)

In our example, let $\cM(B, N) = \cD((B\times \bd W)\cup_{N\times \bd W} (N\times W))$, 

where $\cD$ is the fields functor for the TQFT.

\xxpar{Module boundaries, part 1:}

{For each $0 \le k \le n-1$, we have a functor $\cM_k$ from 

the category of marked hemispheres (of dimension $k$) and 

homeomorphisms to the category of sets and bijections.}

\xxpar{Module boundaries, part 2:}

{For each marked $k$-ball $M$ we have a map of sets $\bd: \cM(M)\to \cM(\bd M)$.

These maps, for various $M$, comprise a natural transformation of functors.}

Given $c\in\cM(\bd M)$, let $\cM(M; c) = \bd^{-1}(c)$.

If the $n$-category $\cC$ is enriched over some other category (e.g.\ vector spaces),

then $\cM(M; c)$ should be an object in that category for each marked $n$-ball $M$

and $c\in \cC(\bd M)$.

\xxpar{Module domain $+$ range $\to$ boundary:}

{Let $H = M_1 \cup_E M_2$, where $H$ is a marked $k$-hemisphere ($0\le k\le n-1$),

$B_i$ is a marked $k$-ball, and $E = B_1\cap B_2$ is a marked $k{-}1$-hemisphere.

Let $\cM(B_1) \times_{\cM(E)} \cM(B_2)$ denote the fibered product of the 

two maps $\bd: \cM(B_i)\to \cM(E)$.

Then (axiom) we have an injective map

\[

	\gl_E : \cM(M_1) \times_{\cM(E)} \cM(M_2) \to \cM(H)

\]

which is natural with respect to the actions of homeomorphisms.}